PRODUCTS
CNC machines
CNC machines differently computer-controlled numeric devices. CNC systems control graphical monitor support, which is very important when machining surfaces with different angles of inclination.
The machine enables quick and precise execution of complicated elements using many tools.
The machine can use many tools during one cycle, automatically fed to the spindle as needed. One machine can, for example, drill, mill, thread, re-drill. The control of such a machine is entrusted to CNC control systems. It is the most efficient control system used in machining.
Each of the used circular saw blades is different, subjected to technical inspections, sold is fully operational. Each piece has an original photograph. You always order the machine visible in the picture. All used circular saw blades listed below are on our stock. In the case of new machines, if the description does not contain information about the stock, please ask for availability.
(H0503)
(H0503)
TECHNICAL DATA
producer |
CNC TECHNOLOGIES |
model | GRAND CENTRAL 1515 |
spindle | 3,5kW air-cooled |
working surface X / Y / Z | 1500mm x 1500mm x 200 mm |
software | AUTODESK ARTCAM 2016 open |
program resolution | 0,01mm |
mechanical resolution | 0,04mm |
max speed in slow passes | to 33m / min |
max. speed of work in the material | to 25m / min |
inverter |
3,7kW Fuling |
(H0516)
(H0516)
TECHNICAL DATA
SPINDLE | 3kw ER20 liquid cooled |
WORKING AREA X / Y / Z | 600mm * 900mm * 200mm |
WORKTABLE | 600 X 900 mm |
CONTROL | Mach3 |
Program resolution | 0,01mm |
Mechanical resolution | 0,05mm |
Oprogramowanie | AUTODESK ARTCAM 2016 open |
POWER | 230V |
Speed in slow journeys | 7m / min |
Spindle speed | 24000 rpm |
dimensions length / width / height | 1300 / 1100 / 1100mm |
weight | 500kg |
(H0383)
(H0383)
TECHNICAL DATA
mechanical accuracy |
0,05 mm |
program resolution | 0,0125mm |
speed | 30m / min |
rated voltage | 400V, 50Hz |
working temperature | 0-45 ° C |
working surface X | 2500mm |
Y work surface | 1300mm |
working surface Z | 260mm |
HSD Italian spindle | 7kW |
Vacuum work table with dimensions | 300x2500mm |
dimensions of the machine length / width weight |
3300 / 2100mm 1300kg |
(H0384)
(H0384)
TECHNICAL DATA
working field |
1500x3000x300mm |
air-cooled spindle (ER32) | 5kW |
inverter | 5,5kW |
power | 3 phase, 50Hz |
lubrication system | oil |
program resolution | 0,01mm |
mechanical resolution | 0,05mm |
max speed in slow passes | to 33m / min |
max speed of work in the material | to 25m / min |
(H0363)
(H0363)
TECHNICAL DATA
working field |
1300x2500x200mm |
air-cooled spindle | 4,5kW |
Very high quality inverter | 5,5kW |
power | 3 phase, 50Hz |
lubrication system | oil |
program resolution | 0,01mm |
mechanical resolution | 0,05mm |
max speed in slow passes | to 33m / min |
max speed of work in the material | to 25m / min |
(H0386)
(H0386)
TECHNICAL DATA
working field |
1300x2500x300mm |
air-cooled spindle (ER32) | 5kW |
inverter | 5,5kW |
power | 3 phase, 50Hz |
lubrication system | oil |
program resolution | 0,01mm |
mechanical resolution | 0,05mm |
max speed in slow passes | to 33m / min |
max speed of work in the material | to 25m / min |
(H0387)
(H0387)
TECHNICAL DATA
working field |
1500x2000mx200mm |
air-cooled spindle | 3.5kW |
FULING inverter | 3,7kW |
(H0483)
(H0483)
TECHNICAL DATA
ER20 liquid cooled spindle |
3kW |
working area X / Y / Z | 1200 / 1200 / 200mm |
worktable | 1200x1200mm |
control | Mach 3 |
program resolution | 0,01mm |
mechanical resolution | 0,05mm |
AUTODESK ARTCAM 2016 open software | 230V |
speed in slow runs | 7m / min |
spindle speed | 24000obr./min. |
dimensions length / width / height | 1800 / 1800 / 1700mm |
weight | 660kg |
(H0484)
(H0484)
TECHNICAL DATA
speed of work in the material |
to 25m / min |
free journeys | to 40m / min |
weight around | 1900kg |
(H0378)
(H0378)
TECHNICAL DATA
operating range |
X 4200 - Y 2100 - With 90 mm |
Demand for space | ok 11m2 |
vacuum panel, working table with an MDF board divided into 6 zones |
manual control |
vacuum pump | 1 x 250 m3 / h - 8828 CFH |
axis speed | X 30 - Y 30 - With 10 mt / min |
electrospindle head | R33M 3,3 Kw - ER32 clamping handle - 18000 rpm |
electrospindle head | R22M 2,2 Kw - ER25 clamping handle - 24000 rpm |
electrospindle head | R55A 5,5 Kw (7,5 HP) ER32 clamping handle - 18000-24000 rpm |
TC6 automatic servo control unit | |
6 position | Iso 30 cone |
unit | D037 up to 6 mm - up to O 15 / 64 " |
cutting unit | S180 1,7 Kw motor / 180 mm Saw - 7,08 '' / 0-90 ° |
cutting unit | S250 5 Kw motor / 250 mm Saw - 9,84 '' - / 0-90 ° |
total dimensions | 2,0 x 7,9 mt |
weight | approx. 2450 kg |
(H0393)
(H0393)
TECHNICAL DATA
operating range |
X 6300 - Y 2100 - With 90mm |
space requirement | ok 16 m2 |
vacuum panel, working table with an MDF board divided into 9 zones |
manual control |
vacuum pump | 2 x 250 m3 / h - 8828 CFH |
spindle head (opt.) R33M 3,3 Kw - ER32 clamping holder |
18000 revolutions / min |
spindle head (opt.) R22M 2,2 Kw - ER25 clamping holder |
24000 revolutions / min |
spindle head (opt.) R55A 5,5 Kw (7,5 HP) - ER32 clamping holder |
18000 - 24000 revolutions / min |
speed of X axis 30 - Y 30 - Z | 10 m / min |
automatic unit (opt.) TC6 servo control | 6 position - Iso 30 cone |
D037 unit |
up to 6 mm - up to o 15 / 64 " |
cutting unit |
S180 1,7Kw silnik / 180mm Saw - 7,08 '' / 0-90 ° |
cutting unit | S250 5Kw silnik / 250mm Saw - 9,84 '' / 0-90 ° |
total dimensions | 2,0 x 7,9mt |
weight |
ok.3600kg |
(W0400)
(W0400)
TECHNICAL DATA
scope of work in the X axis |
1300mm |
the scope of work in the Y axis | 2500mm |
scope of work in the Z axis | 300mm |
air-cooled spindle | 5,5 kw, ER 32 |
spindle rotation | 18.000 revolutions / min. |
feed system (X and Y axis) toothed guides | |
feed system (Z axis) screw and roll guides | |
feed using stepper motors | |
SHIMPO drive gear | |
max. travel speed | 30 m / min |
max working speed | 15 m / min |
accuracy of work | 0.05 mm |
raster vacuum table with 6 sections and T groove | |
dry BECKER vacuum pump, air-cooled | power 129 m3 / h |
material positioning | pneumatically |
lowering limiters | after 2 art in the X and. axis |
tool length sensor | |
DSP control | |
interface: USB | |
electrical connection | 3 phase 400 V, 50 Hz |
working temperature of the environment | 0-45 ° |
milling spindle: | |
air-cooled spindle |
5,5 kw |
fixing the tool | ER 32 |
air-cooled | |
speed, stepless | to 18.000 revolutions / min. |
tool holders with diameters | 4, 6, 8, 10, 12, 16, 20 mm |
max speed | 15 m / min |
total dimensions length / width | 3300 / 2100mm |
weight | 1800kg |
(W0379)
(W0379)
TECHNICAL DATA
working range X, Y 900x600mm |
X, Y 900x600mm |
electrically adjustable table height | to 300mm |
laser power | CO2 80W |
engraving speed | 0-1200mm / s |
cutting speed | 0-600 mm / s |
Repeat accuracy / resolution | +/- 0,01 mm / 1000 dpiz |
min font size | 1mm |
linear guides | in the X and Y axes |
drive X, Y through high precision toothed belts and stepper motors | |
Operating Systems | Windows 98, Windows XP, Vista, Windows 7 |
control via LCD display | |
USB connector with 128 MB working memory | |
red positioning laser for reduced set-up time | |
any zero point adjustment on the surface for flexible work and positioning | |
power consumption | max 1000W |
compatible formats | BMP, HPGL (PLT), DXF, G-CODE, DST, Al (Autocad, CorelDraw) |
electrical connection | 230 V, 50 / 60 Hz |
laser warranty | 2500 working hours |
cutting depth depending on the material (cutting power for acrylic approx. 20mm) | |
openings on the front and back for inserting longer elements | |
active water cooling for stable operation of the laser system and longer working life of the laser tube | |
rotating device for engraving round and cylindrical materials with a diameter | up to 200 mm and 450 mm in length |
designed for wood, ceramics, glass and plastic | |
overall dimensions length / width / height | 1420 / 1020 / 1080mm |
weight | 300kg |
(W0401)
(W0401)
TECHNICAL DATA
scope of work in the X axis |
1500mm |
the scope of work in the Y axis | 3000mm |
scope of work in the Z axis | 300mm |
air-cooled spindle |
5,5 kw, ER 32 |
spindle rotation | smoothly to 18.000 rpm. |
max. travel speed | 30 m / min |
max. working speed | 15 m / min |
tool holders with diameters | 4, 6, 8, 10, 12, 16, 20 mm |
accuracy of work | 0.05 mm |
control | DSP (optional MACH 3) |
interface | USB |
software | CAD / CAM ARTCAM EXPRESS 2014 |
electrical connection | 3 phase 400 V, 50 Hz |
working temperature of the environment | 0-45 ° C |
total power | 18 kW |
rated voltage | 400 V |
frequency | 50 Hz |
security | A 63 |
stub pipes | Ø = 100 mm |
air speed | 30 m / sec. |
extraction volume | 2500 m³ / h |
connection of compressed air | 9 DN |
air consumption | 60 l / min. |
working pressure | 6 bar |
dimensions length / width / height | 3800 / 2100 / 2200mm |
weight | 2000kg |
(
(
TECHNICAL DATA
head movement | 20 m / min |
head with 4 handles and integrated saw |
|
length of the workpiece min / max | 300/3000 mm |
height of the workpiece min / max | 120 / 900mm |
thickness of the workpiece min / max | 12/30 mm |
the saw operates on the X axis | |
max. the depth of the groove that a saw can make | 10mm |
min / max diameter of drilled holes | 3mm-35mm |
Y axis | 750mm |
X-axis | unlimited / supported 3000mm |
Z axis | max thickness 30mm |
axis A | 360 ° |
tension | 400V |
weight | 550kg |
- start
- Previous article
- 1
- 2
- Next article
- end